通用包装 江苏PVC塑料止水带300*8

        本通用包装类产品：通用包装 江苏PVC塑料止水带300*8，由河北衡水市供应商河北瑞博橡塑制品有限公司供应，详细信息如下：
江苏PVC塑料止水带300*8　咨询热线：131 6657 0832
PVC plastic sealing strip is composed of PVC PVC resin and various additives, sealing material by mixing, granulating and extruding process and made of water, mixing, granulating and extruding processes made with products, also known as the PVC waterstop.
PVC plastic stop belt specifications: 280 * 6300 * 4300 * 6300 * 8300 * 10350 * 8350 * 10 etc..
PVC plastic water stop belt features: it utilizes elastic deformation property of elastomer material to prevent leakage and prevent seepage in building structure joint, and has the characteristics of corrosion resistance and good durability. It takes full advantage of the elastic deformation property of PVC resin, and has the function of anti leakage and seepage prevention in the joint of building structure, and has the characteristics of corrosion resistance and good durability. This product is mainly used for concrete pouring, located in the construction joints and deformation joints, and concrete as one of the basic works.
PVC plastic waterstop uses: tunnel, culvert, aqueduct, dam, reservoir structures, underground facilities, etc..
PVC plastic water stop belt and rubber waterproof belt construction method is the same. In the pouring buried to make it smooth and fit the concrete interface, the joint part of the adhesive fastening, pouring process to buried in an appropriate capacity of fully vibrating concrete, the good combination with concrete, in order to obtain the best sealing effect.
江苏PVC塑料止水带300*8　咨询热线：131 6657 0832
PVC塑料止水带是由PVC聚氯乙烯树脂及各种填加剂，经混合、造粒、挤出等工序而制成的止水材料，经混合、造粒、挤出等工序而制成的止水带产品，又称为“PVC止水带”。
PVC塑料止水带规格:280×6,300×4,300×6,300×8,300×10,350×8,350×10等。
PVC塑料止水带特点：它利用弹性体材料具有的弹性变形特性在建筑构造接缝中起到防漏、防渗作用，并且具有耐腐蚀、耐久性好的特点。它充分利用聚氯乙烯树脂具有的弹性变形特性在建筑构造接缝中起到防漏、防渗作用，且具有耐腐蚀、耐久性好的特点。本产品主要用于混凝土浇注时设置在施工缝及变形缝内与混凝土构成为一体的基础工程。
PVC塑料止水带用途：隧道、涵洞、引水渡槽、拦水坝、贮液构筑物、地下设施等。
PVC塑料止水带与橡胶止水带的施工方法是相同的。在浇埋时要使其与混凝土界面贴合平整，接头部分粘接紧固，浇埋过程中要以适当的力充分震捣混凝土，使其与混凝土结合良好，以获得*佳的止水效果。
江苏PVC塑料止水带300*8　咨询热线：131 6657 0832
Construction method of PVC plastic water stop belt
The construction method of plastic water stop belt is the same as that of rubber water stop belt. In the pouring buried to make it smooth and fit the concrete interface, the joint part of the adhesive fastening, pouring process to buried in an appropriate capacity of fully vibrating concrete, the good combination with concrete, in order to obtain the best sealing effect.
Notes on construction of PVC plastic water stop belt
1. in the process of construction, because there are many pointed stones and reinforcing bars in the concrete, the operation should pay attention to avoid mechanical damage to the water stopping belt.
2., in the positioning of plastic water stop belt, to make it and concrete interface leveling, can not appear water stop, flip, distortion and so on, otherwise should be timely adjustment
3. when pouring the fixed water stop belt, the water stop belt should be prevented from shifting and the sealing effect will be affected.
4., plastic sealing tape joints can be used bonding, heat welding and other methods to ensure firm joints.
5. in the process of pouring concrete, attention should be paid to full shock to achieve the full combination of water stopping belt and concrete.
江苏PVC塑料止水带300*8　咨询热线：131 6657 0832

关键词：通用包装 通用包装 江苏PVC塑料止水带300*8 河北瑞博橡塑制品有限公司